Full Easyframe Conservatories Specification


Not included in Easyframe conservatory kits:- Included in Easyframe conservatories kits:-

general conservatory specification

conservatory roof specification

Multiwall Polycarbonate specification

conservatory side frames/walls specification

double glazing specification

glazing method specification

French door specification

windows/side wall frame specification

top opening casement windows specification

maintenance and periodic cleaning

all components are designed for long life and trouble free preformance with minimal maintenance, we recommend that all pvcu, polycarbonate and aluminium parts are cleaned with hot soapy water only,

the surface of all toughened safety glass is much softer than float (ordinary window) glass and care should be taken NOT to scrape the surface when removing labels or cleaning, this information MUST be passed to the installer,

during manufacture pvcu extrusions and polycarbonate roofing have protective tapes and films applied, these MUST be removed immediately after installation and not left for extended periods in the sun during storage, failure to remove these tapes will cause damage to your conservatory,

all locks and moving parts should be cleaned and lubricated with a light oil periodically, guttering should be cleaned and leaves/debris removed on a regular basis, your installation manual and parts list should be keep for furture reference,

in the event of damage to your conservatory you will need the part numbers in order to obtain replacement parts, spare parts will be available for at least ten years under the Easyframe customer care policy