Techglide Sliding mirror wardrobe doors specs and Information

Navigation

Prices
Images
Specification
Accessories
Measuring
Ordering
installation

 



Image shows 3 door
sliding mirror wardrobe

Quality Sliding wardrobe doors available at low prices. Here is information and specification for some of the elements that go into making a Made To Measure Sliding Mirror Wardrobe.

wardrobe doors

For prices, frame and glass options check out our pricelist. The price list gives you the strpped down prices plus any extras you may require. For the Mirror Wardrobe Door price list Click Here

Tracks are delivered slightly oversized and are to be cut down to size on site with a junior hacksaw. This is to ensure a tight and neat finish, and for transportation reasons.


Bottom roll framed Sliding Door System Specification

Sliding wardrobe doors shall be of precision rolled steel framed door panels Be supported by adjustable bottom rollers that travel in a steel or aluminium track and top guides/rollers that travel within a top track.
The steel frame shall consist of stiles (vertical members) and rails (horizontal members).

The stiles and rails shall be joined at each corner by unhanded connectors that snap into position, these are positively fastened, Bottom connectors shall have either ball bearing rollers or solid acetyl plain bearing wheel both with an integral anti jump housing. Top connectors have a solid plastic guide or roller permanently attached to the connector housing, which provides a snug fit with the top track. The plastic guide will adjust to five different positions to ensure an optimum fit. Vertical adjustment is 1/18" (29mm) on the bottom and 1/14" (32mm) on the top.

The top track shall be one piece and of pre-finished precision rolled steel. The bottom track is also prefinished precision rolled steel and does not exceed 5/16" (8mm) height from the floor this reduces any tripping hazard.

Top track finishes shall match the stile and rail. Bottom track matches all finishes with the exception of woodgrain styles where a white bottom track is used.

The stile, rail, top track and bottom track have a baked enamel paint finish (satin gold, bright gold, Chrome, Satin Chrome, bright white, mat black, arctic silver, architectural brown, or empire almond) or a laminate finish (Pearwood, brass, mahogany, beech, cherry, white ash, pine or oak). The connectors are plated to provide corrosion protection.

Panel thickness: Glass or MFC (3mm to 4mm)
Maximum single door size: (850mm x 2438mm)
Maximum single door weight: (38kgs)
All glass products are be used with safety backed mirror. The backing conforms to BS standards.
BS6 206 Class B


MFC(Melamine faced chipboard) or Woodgrain Effect Information

One of the main components in furniture production is melamine faced chipboard. It's produced based on chipboard faced with special laminate materials.

There are some ways of chipboard facing:

  • Paper-tarred films facing.
  • Paper-laminated plastic facing.
  • Polymer film facing.
  • Organic veneer sheet facing.
  • Facing with paint, varnish, phenolformaldehyde resin etc.

The surface of melamine faced chipboard may be smooth or imitate the relief of wood grain or pearl. There is a variety of colors and textures. Melamine faced chipboard is extremely resistant to high temperature and household chemical goods. It is used as a decorative product for furniture and interior applications.

MFC products rely on a resin impregnated decorative paper, either plain coloured or printed, to achieve the required colour or pattern.

Melamine Faced products have the decorative papers directly pressed to the surfaces of a core material. Most commonly the core is either chipboard, resulting in the product known as MFC, or MDF, resulting in the product known as MFMDF.


Mirror Door Lacquer cleaning guide

  • To clean lacquer wall units and wardrobe doors, use only a damp cloth on lacquer doors, sides, and tabletops of all units.
  • Do not use any furniture polish or cleaners with ammonia base. Mica cleaner may be used on side panels and shelves only. Cleaning of mirror backs and mirror doors is also very important.
  • Cleaning solution should be mild, and should not contain ammonia, vinegar, bleach, or solvents.
  • Cleaning solutions should be sprayed on a clean cloth. Do not spray directly on mirror. Spraying directly on mirror can allow the cleaning solution to run down or behind the mirror and cause discoloration.


For terms and conditions, click here

Sliding Wardrobe Doors -Specification