ProtechDirect >

Secondary Double Glazing

This is an an architectural aluminium secondary glazing system anchored into a hardwood subframe for maximum sound insulation and should not be confused with upvc or aluminium diy kits, it is fitted in St Paul's Cathedral and Teesside airport to name a tiny few of the architectural projects that this system has been used.

Secondary Double Glazing Surveying Instructions

How do I get a Quotation for Secondary Glazing?

In order to obtain a quotation for secondary glazing you need to either email or fax us with - widths x heights x style (e.g. two panel vertical slider, three panel horizontal slider, hinged unit etc) as per the measuring instructions below

You would be well advised to have a good look at the secondary double glazing options available and which of those suits your requirements for the final operation of the products.

 

Important Note:

These instructions are for general guidance only and you should satisfy yourself that they will apply to your situation.

We can accept no responsibility for units measured incorrectly or if you misunderstand

Single Lift Out or Hinged Units

1.   Take the overall size from wall B to wall C and minus 10mm, i.e. 1780mm becomes 1770mm
2.   Measure from wall A to wall C and minus 10mm

2 Panel Horizontal Slider

1.   Take the overall size from wall B to wall D and minus 10mm, i.e. 1780mm becomes 1770mm
2.   Measure from the wall to the centre of C and minus 5mm i.e. 785 becomes 780mm
3.   Measure from C to D - centre to centre to line up all mullions
4.   Measure from wall A to wall D and minus 10mm

3 Panel Horizontal Slider

1.   Take the overall size from wall B to wall E and minus 10mm, i.e. 1780mm becomes 1770mm
2.   Measure from the wall to the centre of C and minus 5mm i.e. 785 becomes 780mm
3.   Measure from C to D - centre to centre to line up all mullions
4.   Measure from wall A to wall E and minus 10mm

4 Panel Horizontal Slider

1.   Take the overall size from wall B to wall F and minus 10mm, i.e. 1780mm becomes 1770mm
2.   Measure from the wall to the centre of D and minus 5mm i.e. 785 becomes 780mm
3.   Measure from B to C - centre to centre to line up all mullions
4.   Measure from wall A to wall F and minus 10mm

Vertical Slider

This gives an all round tolerance of 5mm

1.   Measure from wall D to wall C and minus 10mm
2.   Measure from wall A to wall C and minus 10mm
3.   Measure from wall A to the centre of B and minus 5mm

Important Note:

These instructions are for general guidance only and you should satisfy yourself that they will apply to your situation.

We can accept no responsibility for units measured incorrectly or if you misunderstand

How do I get a Quotation for Secondary Double Glazing?

In order to obtain a quotation for secondary glazing you need to either email or fax us with - widths x heights x style (e.g. two panel vertical slider, three panel horizontal slider, hinged unit etc)

You would be well advised to have a good look at the secondary glazing options available and which of those suits your requirements for the final operation of the products.

 

© These web pages and the information and images within them are copyright of The B.B. Group of Companies